TOYOTA 4RUNNER (5TH GEN) (2010-CURRENT) SLIMSPORT ROOF RACK KIT / LIGHTBAR READY
The Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit / Lightbar ready - by Front Runner was built for your best adventures. Its wind fairing comes ready for mounting a light bar, for all the drives after dusk. The rack is compatible with most Front Runner accessories, so building the perfect setup for a day, weekend or week out in the wild is easier than ever.
Upgrade or change your Slimsport Rack Tray configuration at any time by adding the RACK ACCESSORIES or explore them later when a new adventure calls.
- This low profile flat deck Slimsport rack has a load carrying area of 2080mmL (81.88") x 1175mmW (46.25").
- The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
- The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
- Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket.
- Easily add on the Roof Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small – by Front Runner (sold separately) for all Front Runner side mount accessories.
- The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
- Need a lightbar? The optional Toyota 4Runner (2009-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow the use of 40" LED Slim Light Bar VX1000-CB / 12V/24V / Single Mount (sold separately).
- Fitment guide and all mounting hardware included.
- 6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
- Note: Uses factory fixing points with no drill required front foot as standard but also includes hardware included for drill option (recommended).
- Note: Under Rack Tables are not compatible with the Slimsport rack kit range.
- Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
KSTF001 - Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit - by Front Runner
Consisting of:
1 x Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit
Installation Hardware
Fitting Instructions
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 37kg (81.57lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 37kg (81lbs)
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit / Lightbar ready - by Front Runner was built for your best adventures. Its wind fairing comes ready for mounting a light bar, for all the drives after dusk. The rack is compatible with most Front Runner accessories, so building the perfect setup for a day, weekend or week out in the wild is easier than ever.
Upgrade or change your Slimsport Rack Tray configuration at any time by adding the RACK ACCESSORIES or explore them later when a new adventure calls.
- This low profile flat deck Slimsport rack has a load carrying area of 2080mmL (81.88") x 1175mmW (46.25").
- The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
- The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
- Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket.
- Easily add on the Roof Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small – by Front Runner (sold separately) for all Front Runner side mount accessories.
- The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
- Need a lightbar? The optional Toyota 4Runner (2009-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow the use of 40" LED Slim Light Bar VX1000-CB / 12V/24V / Single Mount (sold separately).
- Fitment guide and all mounting hardware included.
- 6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
- Note: Uses factory fixing points with no drill required front foot as standard but also includes hardware included for drill option (recommended).
- Note: Under Rack Tables are not compatible with the Slimsport rack kit range.
- Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
KSTF001 - Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit - by Front Runner
Consisting of:
1 x Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit
Installation Hardware
Fitting Instructions
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 37kg (81.57lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 37kg (81lbs)
